Glass Fence

We have had several requests asking about details on our ‘Glass’ fence. Let us start by pointing out our fence is a ‘fake-glass’ fence – it is actually made from polycarbonate material. We are not ones for long posts so we will break this down fast.

WHY A FENCE

Simple – we added a pool to the side-lot that came with the home, and state law requires the pool to be fenced. We also wanted to allow our dog Banksy to be able to enjoy the outdoors without us worry if he was playing on the road. The fence were were worried about – as we didn’t want to impact the look of the house – distracting from the original design and look of the garden – we started to lose sleep over the fence design.

DESIGN INSPIRATION

Luckily we didn’t need to look too far. We were inspired by our neighbors fence. Their gorgeous fence is an original pool fence to the house and it made from aluminum and actual safety wire glass. The minute we noticed it – we were 1] jealous 2] knew we had to do something in-the-manner-of to be period appropriate. Our landscape designer Julie DeLeon of Groundwork Design also provide some visual inspiration with black metal and glass fences, and we looked to our previous home for ideas too [see here].

MATERIALS

Here is a list of the materials that were purchased / utilized during construction:

  • Fake Glass: Mulit-wall polycarbonate sheeting we purchased through EPlastics, the material was made in Wisconsin, we had it custom cut and shipped direct
  • Posts: Standard 2″ square steel posts painted black [similar material – see here]
  • Post Caps: Plastic you can easily source these [local hardware or amazon]
  • Concrete: Used to set the posts
  • Frames: Steel hot rolled Angle bar [similar materials – see here]
  • Screws: Frames were screwed to the posts so at anytime if needed they can be removed.
  • Gate Hinge: Again nothing custom – readily purchased at hardware store.
  • Gate Handle: Simple and cost effective – here is something similar to what we used
  • Gate Plate: Custom made from plate steel, welded to steel angle bar painted black.

CONSTRUCTION

We had been working with, and still to this day, work with a local General Contractor, Juan Ramirez and his crew RASE Construction LLC – hold our house together and are not afraid of our crazy project requests. We are not handy people, and rely upon this crew to help us with our projects, they figured out how to construct the fence from all the pieces and put it together. The frames were welded off site and everything else was put together onsite. The poly carbonate panels are 3ft wide by 6ft tall, and are set into frames that are 2 panels across, attached to fence posts set every 6ft. We tried to do 9ft wide with 3 panels, but the wind made them too unstable. The rest of the details – to us it was magic. Sorry we are not of much use here as to the ‘how’, we truly are useless even with a hammer.

LESSONS

There was some trial and error with the fence, just like anything, nothing is really ever perfect and you just need to roll with it. Here are a few things we learned:

  1. Polycarbonate delivery was huge, the crates were custom made and hard to crack open – we needed a crew to help us off load a delivery that would normally go to a construction site with forklifts to offload – we had to do it by hand. It can be done, but be prepared with a crew to help you.
  2. Light. The fence creates the most amazing light shows all times of the day. It really obscures detail until you or the object is up close to the fence. You can see movement of people and cars going by, and night the headlights and tail-lights are like moving abstract art. And you can see the garden plantings and their movement too. So far no discoloration to the panels from the light has been observed.
  3. Weather. It is holding up well so far, it went in August 2017 and at time of writing April 2018 it is looking great. It has endured: heavy snow; high winds; tree branches; hot sun; and torrential downpours. So far we are giving it a thumbs up.
  4. Cleaning. It is low maintenance, with the hammered effect to the poly carbonate, to make it opaque it helps hide the dust and the rain splatter. A quick hose down get rid of any bark or soil.
  5. Channels. The polycarbonate is twin-walled so has channels for water and small bugs to make themselves a home. So far – the bugs haven’t been an issue. The first panels that were installed we used silicone and it created condensation issues. There is a tape to seal them that comes with the manufactures recommendation – don’t skip buying it, it seems to work to keep bugs out and condensation a way to escape [see photo below] It was only utilized on the bottom edge of the panels, the rest of the edges are sealed with silicone.

Oops this turned out longer than we thought it would. Well – we hope this helps, and please share your projects if you are inspired to create your own ‘frosted-fake-glass-fence’. And if you have any question please ask away we will do our best to answer your questions based on our project and experience to date.

 

 

Paul McCobb – Glass Partitions

_COS5982

One of our favorite features in the house are the Paul MCobb designed glass partitions. There are two of them in the house. The first greets you as you enter the Front Doors, and the other separates the sleeping area from the dressing section in the Master Bedroom. We get requests for detailed shots for inspiration to enable home-owners to recreate the look or idea in their own home, so here we are sharing details.

_COS5991

The Glass was a collaboration between Blue Ridge Glass Corporation, based in Kingsport – Tennessee, and Paul McCobb – as apart of their patterned glass collection. We haven’t been able to find the company or details on what happened to them [we found this]. If you have any vintage magazines, keep your eyes peeled for some advertisments like the one below, apparently you could mail in and request a ‘project booklet’ for ideas on what to do with the glass.

53c30c10ae3dd444e42a6658674a991f

We are not handy people with a hammer or any tool for that matter, so we can’t wax poetic on the process or details of construction. We can, however, take pictures and you can share these, or utilize them yourself [hopefully with more skills and technical know-how than us] to translate the construction methods.

IMG_1225

IMG_1226

The framework is the same on both sides with the glass sandwiched in-between, and is secured to the ceiling and the floor.

IMG_1227

A few details of the glass itself – it is ridged on one side and smooth on the other.

IMG_1222

IMG_1223

We love waking up to see them greeting us in the morning.

IMG_1399

IMG_1398

Well – we hope these photographs and brief details help. Ask away with any other questions, and we will try our best to answer them.